How do I replace Clean Base™ Dirt Disposal bag?

To purchase replacement bags

Please visit the iRobot Store - Parts and Accessories to order a part.

To replace a full bag

If there is a solid red LED lit up on your Clean Base™ Automatic Dirt Disposal, this means the bag will need to be replaced.

Follow these simple steps to replace the bag.

1. Lift up the lid of the canister lid to open.

   

2. Pull up on the plastic card leading to the vacuum port and lift up to pull the bag out of the canister.

   Note: This will seal the bag so no additional dust or debris can get out.

   

3. Discard the used bag.

4. Place a new bag into the canister, sliding the plastic card into the guide rails.

    

   

5. Press down on the lid making sure it is firmly closed.

    

   Note: The solid red LED can also mean a bag is not being detected. Please ensure the bag is fully secured into your Clean Base™ Automatic Dirt Disposal before closing the lid.
   
   Note: To achieve optimal performance with your robot and Clean Base™, clean and/or replace your robot's filter, as needed.
   
   
   

Note: The newer models use a cardboard evac bag that is a bit larger and holds more debris. The original plastic bag is intended only for use with classic models. Please be sure you are using the correct bag for your model.

 

Original Plastic Evac Bag For classic models i, j, s, Essential and Combo 10 Max series	Original Cardboard Evac Bag For Classic models	New Cardboard Evac Bag for any LiDAR-based robot operating on the new Roomba® Home App

 

Click here to see the full list of models that use the new bag.

 

• Roomba® Mini + AutoEmpty™ Dock
• Roomba® 100/1000 Series Vac + AutoEmpty™ Dock - NA only
• Roomba® 100/1000 Series Combo + AutoEmpty™ Dock
• Roomba® Plus 400 Series robot + AutoWash™ Dock
• Roomba® Plus 500 Series robot + AutoWash™ Dock
• Roomba® Max 700 Series Vac + AutoEmpty™ Dock
• Roomba® Max 700 Series Combo + AutoWash™ Dock