How to clean or replace the robot bin and filter. Roomba® e, i, j series, and Combo 10 Max

Use the following procedure to regularly  clean the Vacuum Bin of your Roomba® e Series, i Series, j Series, or Combo 10 Max robot.

1. Press the bin release button on the back of the robot to remove the bin. The bin release tab has a bin icon on it.

   
   

2. Open the bin door to empty the bin. The bin door release button has a bin icon.

   
   

3. Grasp the side of the filter to remove the filter from the left side of the bin.

   
   

4. Shake off debris by tapping the filter against your trash container. Then, replace the filter.

   Note: Filters are not designed to be washed or to come in contact with liquid.

5. Rinse out excess debris with warm water and allow the bin to dry. Ensure the bin is completely dry.

   Note: The bin is designed to be rinsed by hand only. It is not dishwasher safe and should only be cleaned by rinsing with warm water.

6. Place the filter back into the bin.

7. Slide the bin into the bin slot, securing it into place.

Please visit the iRobot Store - Parts and Accessories or use an authorized retailer to order a part. If you believe you're in warranty, please contact iRobot Customer Care.

For customers outside North America, please visit Global.iRobot.com.