Roomba® 615 Dust Bin / Dirt Disposal Bag
Roomba® 615 does not have a traditional dust bin and filter. Instead, all dust and debris are immediately delivered to the dirt disposal bag within the robot. No filter needed.
- Lift upward to remove the robot's top cover.
- Press and hold the dirt disposal bag release button to remove the dirt disposal bag.
- Insert a new dirt disposal bag, then close the robot's top cover.
NOTE: For optimal performance, replace the dirt disposal bag promptly based on actual usage.
Roomba® 675 Cleaning the Filter and Bin
- Lift upward to remove the robot's top cover.
- Press and hold the dust bin release button to remove the dust bin.
- Open the dust bin cover and remove the filter.
- If necessary, rinse the filter with clean water. Allow it to dry completely before reinstalling.
- Empty and clean out the dust and debris from the dust bin.
- Reinstall the filter cover onto the filter. Install the filter. Reinstall the dust bin into the robot.
- Close the robot top cover.
IMPORTANT: The filter cover is washable, but must be completely air-dried before reinstalling it into the dust bin. Do not clean the dust bin in a dishwasher. Do not use a brush or your fingers to clean the filter. Wash the dust Bin and filter with clean water only. Do not use any detergent. To achieve optimal performance with your robot and dock, clean and/or replace your robot’s filter as needed.
NOTE: If you place your robot on the dock by hand, it will not empty automatically. In this case, use the Roomba® Home App or hold the power button down for 2-5 seconds.
