Cleaning the PowerSpin™ Roller Mop
- Press and hold the roller mop release button on the side, then slowly pull out the roller mop horizontally.
- Clean and rinse the roller mop, then allow it to air-dry at room temperature.
Note: When removing the roller mop end cap, pull it out with moderate force. When reinstalling, press it firmly into place.
- Align the roller mop with the end cap. Push it in and press firmly until you hear a "click", indicating it is securely in place.
Note: When installing the roller mop, make sure the green release button on the end cap is positioned at the upper right corner. Align the end cap with the robot, then push it horizontally inward until you hear a "click," indicating it is securely in place.
Cleaning Roller Mop Scraper Groove
- Press and hold the release button on the side, then slowly pull out the roller mop horizontally.
- Flip the robot over and push the left side of the roller mop scraper groove forward, and pull it out to the left.
- Rinse or wipe the roller mop scraper groove.
- Align the roller mop scraper groove with the slot on the right and insert it. Firmly press the left side backwards to secure it.
IMPORTANT: Ensure the roller mop scraper groove is properly installed. If it is not securely fastened, the roller mop will be difficult to reinstall.
