How do I clean the Roomba 800 and 900 series AeroForce™ bin?

For optimal performance, the full bin sensors and filter should be regularly cleaned of debris. Please watch the video or use the following procedure to maintain these items.

Note: Please note that your robot series may vary. The AeroForce™ bin care procedure will be the same for Roomba® 800 and 900 series.

Filter

1. Remove and empty the vacuum bin.

   

2. Press and lift the filter door release tab.

3. Remove the filter by grasping the yellow tab.

   

4. Shake off debris by tapping the filter against your trash container.

   

Full Bin Sensors

1. Wipe the sensors on your robot with a clean, dry microfiber or soft cotton cloth.

   

   Sensor Ports

   

   Not Clean

   

   Clean

2. Wipe the inner and outer sensor ports on the vacuum bin with a clean, dry microfiber or soft cotton cloth. The sensors are highlighted in green in the following images.

   Inner sensor ports

   

   Inner Sensor Port

   

   Not Clean

   

   Clean

   Outer sensor ports

   

   Outer Sensor Port

   

   Not Clean

   

   Clean