Roomba® s Series: How do I clean the multi-surface rubber brushes and replace the cleaning head module?

Inspect the Roomba® s Series multi-surface rubber brushes at least once a week, and twice if you own pets. Use the following procedure to regularly clean the multi-surface brushes.

Multi-Surface Rubber Brush Care

Replace the Cleaning Head Module

1. Place the robot vacuum upside down on a flat surface and locate the brush frame release tab on the right side of the cleaning head and press on the tab to lift up the latch.

   

   
2. Remove the brushes from the robot and ensure hair and debris are removed.
   • Remove the brush caps from the ends of the brushes.
   • Remove any hair or debris that have collected beneath the caps.

   • Reinstall the brush caps.

     

     

   • Remove any hair or debris from the square and star pegs on the opposite side of the brushes.

     

     

3. Reinstall the brushes in the robot. Match the shape of the brush pegs with the shape of the brush icons in the cleaning head module.

   

   
4. Remove the bin from the robot and clear any debris from the vacuum path.
   

Please visit the iRobot Store - Parts and Accessories or use an authorized retailer to order a part. If you believe you're in warranty, please contact iRobot Customer Care.

For customers outside North America, please visit Global.iRobot.com.  

For expedited service, please have the following ready:

• Your robot charged and with you
• Your robot's serial number
• For warranty claims: Proof of purchase (receipt or invoice for purchase from authorized iRobot retailers)