Salesforce

Charging Error 11: All Roomba® and Braava® Models 

« Go Back
Article Details

Charging Error eleven (11) indicates a battery hardware fault. Remove the battery from the robot for at least 15 minutes, and place it back in the robot. Then try to run a mission.

If the error persists, try to reboot your robot by pressing and holding the CLEAN button (single button for j series) for 20 seconds. After releasing the button, the light ring will show a white clockwise swirl while it reboots. The reboot procedure is complete when the light ring shuts off.
While the robot is rebooting, please confirm that your robot has the latest Software installed.

If the error persists after following the steps above, please contact iRobot Customer Care.

For expedited service, please have the following ready:
    • Your robot charged and with you
    • Your robot's Serial Number
    • For warranty claims: Proof of purchase (receipt or invoice for purchase from an authorized retailer)

Information
Charging Error 11: All Roomba® and Braava® Models 
19561

Powered by