Salesforce

Overview of the Roomba 800 series battery and charging

« Go Back
Article Details

Roomba® is powered by a rechargeable battery. The battery can last for hundreds of cleaning cycles if cared for properly. You must remove the battery pull tab before Roomba® can charge. Charge the battery overnight before using Roomba® for the first time. Charging time under normal conditions is at least two (2) hours.

If you have a Lithium Ion (Li-Ion) battery, place Roomba® on the Home Base® to wake up the robot, and then use right away. Visit Lithium Ion (Li-Ion) battery to determine which type of battery you have.

Cleaning Time

You should fully charge the battery before each cleaning cycle. Charging time under normal conditions is at least two (2) hours. When fully charged, the battery light will be green and the battery will last for at least one (1) full clean cycle. With a full charge, Roomba® will clean for approximately 60 minutes.

Battery Life

To extend battery life, keeping® Roomba charged is recommended. For additional information, visit battery maintenance tips.

  • Recharge Roomba® as soon as possible following use; waiting several days can damage the battery.

  • If Roomba® will not be used for more than a few weeks, store the robot in a cool, dry place. Fully charge the battery at least once every six (6) months for optimal performance. Charging time under normal conditions is at least two (2) hours.

    For long-term storage of a robot with a NiMH battery, remove the battery from the robot and store in a cool, dry place. NiMH batteries should be stored after being fully charged. When you want to use Roomba® again, insert the battery and fully charge it. NiMH batteries can naturally degrade even when stored separately from Roomba®.

16-Hour Refresh Charge

If Roomba® has been left off of the Home Base® for an extended period, it will automatically initiate a special 16-hour charge cycle. This extensive charge refreshes the battery and extends battery life. While charging, the battery indicator pulses quickly. For some models, all indicators on the robot will turn off after one (1) minute of charging. This is normal behavior, designed to conserve energy. For best results, do not interrupt the refresh charge. Charging time under normal conditions is at least two (2) hours.

Not applicable to the Li-Ion battery.

Charging Roomba®

To charge Roomb®a, connect the line cord to the Home Base® and then dock your robot. Charging time under normal conditions is at least two (2) hours.

When Roomba® is on the Home Base®, the Home Base® power indicator will either go out after four (4) seconds, or remain solid as it charges.

Indicators

For some robots, all indicators on the robot will go out after approximately one (1) minute of charging. This is normal behavior, designed to conserve energy. The robot will continue to charge and will indicate the battery's status after pressing the CLEAN button to wake up the robot. Use the following battery indicator information to determine the status of the battery.

  • Red - Solid: The battery is empty. Please charge Roomba®.
  • Red - Flashing: The battery is too low to start cleaning. Please charge Roomba®.
  • Amber - Pulse: Roomba® is charging.
  • Green - Solid: Roomba® is fully charged.
  • Amber - Quick Pulse: Roomba® is in 16-hour refresh charge mode.

Please visit the iRobot Store - Parts and Accessories, contact iRobot Customer Care, or use an authorized retailer or partner to purchase a battery.

For expedited service, please have the following ready:

  • Your robot charged and with you.
  • Your robot's Serial number.
  • For warranty claims: Proof of purchase (receipt or invoice for purchase from an authorized retailer).
Information
Overview of the Roomba 800 series battery and charging
7272

Powered by